Toyota Corolla (E120): Radiator assy

Replacement

1. Drain coolant

2. Separate radiator hose inlet

3. Separate radiator hose outlet

4. Separate oil cooler inlet tube no.1

5. Separate oil cooler outlet tube no.1

6. Remove radiator assy

  1.  disconnect the fan motor connector.
  2.  disconnect two clamps for wire–harness from fan–shroud.
  3.  remove the two fan mount bolts.
  4.  remove the fan w/motor.

7. Add coolant

8. Check engine coolant leak

    Share this page:

    Other materials:

    Seat belt warning lamp for driver’s seat does not operate
    Wiring diagram Inspection procedure 1 Check combination meter assy Ground terminal c9–12 on the combination meter side. check that the warning lightlights up. Ok: warning light lights up. 2 Inspect front seat inner belt assy lh Disconnect the front seat inner belt ...

    Body
    On–vehicle inspection 1. Canada: tighten bolts and nuts on chassis and body  tighten the bolts and nuts on the chassis parts listed below, if necessary Front axle and suspension drive train rear axle and suspension brake system engine mounting other chassis parts ...

    Checking and replacing fuses
    If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. 1 Turn the engine switch off. 2 Open the fuse box cover. ► Engine compartment Push the tab in and lift the lid off. ► Under the driver’s side i ...