Toyota Corolla (E120) 2002–2008 Repair Manual / Diagnostics / Audio system / Pressing power switch does not start system
Toyota Corolla (E120): Pressing power switch does not start system
Wiring diagram
Inspection procedure
1 Inspect radio receiver assy(+b, acc, gnd)
- Check that the continuity between terminals at each condition, as shown in the chart.
Standard:
- Check that the voltage between terminals at each condition, as shown in the chart.
Standard:
Check and replace radio receiver assy
Other materials:
Replacement
1. Drain brake fluid
Notice:
wash the brake fluid off immediately if it comes into contact with any painted
surface.
2. Remove air cleaner cap sub–assy
3. Remove air cleaner case sub–assy
remove the air cleaner element, then remove the 3 bolts and air
cleaner case sub–assy.
...
Steering column
Preparation
Sst
Recomended tools
Equipment
...
Monitor description
While the engine is being cranked, the battery positive voltage is applied to
terminal sta of the ecm.
If the ecm detects the starter control signal (sta) while the vehicle is
driving, it will conclude that there is
a fault in the starter control circuit. The ecm will turn on the mil and a d ...