Toyota Corolla (E120): Precaution

1. Notices when checking

  1.  power door lock/unlock function: the wireless remote control function operates only when the following 3 conditions are met.
  1.  No key is inserted into the ignition key cylinder.
  2.  All the doors are closed. However, doors can be unlocked even when any of the doors is opened.
  3.  The power door lock system operates normally.

Hint

:

  • the unlock function operates even when a door is open.
  • The unlock function operates even when the key is inserted into the ignition key cylinder, however it must be in the off position.
  1.  remote panic function: the wireless remote control function operates only when the following condition is met.
  1.  The ignition switch is off.

Hint

: the key can be inserted, however it must be in the off position.

  1.  the wireless door lock remote control operational area differs depending on the situation.
  1.  The operational area differs depending on the operators and the ways the transmitter is held.
  2.  In certain areas, the remote control function will only operate partially for the operational area will be reduced due to the vehicle body shape and the influence of the surrounding environment.
  3.  Since the transmitter uses faint electric waves, strong electric waves or noise in the frequency used may reduce the operational area or the remote control may not function.
  4.  When the battery weakens, the operational area is reduced or the remote control may not function.

Hint

: if the door control transmitter has been left in a place that is exposed to direct sunlight, such as on the instrument panel, it may cause the battery to weaken or cause other such problems.

    Share this page:

    Other materials:

    Starting the engine
    ► Automatic transmission or continuously variable transmission 1 Check that the parking brake is set. 2 Check that the shift lever is set in P. 3 Firmly depress the brake pedal. 4 Turn the engine switch to the “START” position and start the engine. ► Manual transmission 1 Che ...

    Towing with a wheel-lift type truck
    ► From the front Release the parking brake. ► From the rear Use a towing dolly under the front wheels. Vehicles without a smart key system: When not using a towing dolly, turn the engine switch to the “ACC” position and shift the shift lever to N. Vehicles with a smart key ...

    Stabilizer bar rear
    Replacement Hint: components: 1. Remove stabilizer bar rear Remove the 2 bolts, nuts and stabilizer bar. 2. Install stabilizer bar rear Install the 2 bolts, nuts and stabilizer bar. Torque: 195 nvm (1,990 Kgf·cm, 144 ft·lbf) Hint: install the stabilizer bar so that the ...