Toyota Corolla (E120): Parking brake lever sub–assy

Adjustment

Components

Other materials:

Inspection procedure
Hint: this dtc chart is on the premise that the engine is cranked normally. If the engine is not cranked, proceed to the problem symptoms table on page 05–42. Read freeze frame data using the hand-held tester or the obd ii scan tool. Freeze frame data records the engine conditions ...

Inspection
1. Cooler thermistor no.1 Check resistance between terminals 1 and 2 of cooler thermistor no. 1 At each temperature, as shown in the chart. Resistance: If resistance value is not as specified, replace the sensor. 2. Cooler and accessory assy Inspect blower switch contin ...

Replacement
1. Work for preventing gasoline from spilling out 2. Remove front wheels 3. Remove engine under cover rh 4. Remove engine under cover lh 5. Drain coolant 6. Remove cylinder head cover no.2 Remove the 2 nuts, 2 clips and cylinder head cover. 7. Disconnect radiator hose inlet &nb ...