Toyota Tacoma manuals

Toyota Corolla Repair Manual: Overhaul

Hint

: components:

1. Remove front wheel

2. Disconnect front stabilizer link assy lh

  1. Remove the nut and disconnect the front stabilizer link assy lh from the shock absorber assy front lh.

Hint

: if the ball joint turns together with the nut, use a hexagon (6 mm) wrench to hold the stud.

3. Disconnect front flexible hose

  1. W/ abs: remove the bolt, disconnect the front flexible hose no. 1 And speed sensor front lh.
  2.  w/o abs: remove the bolt, disconnect the front flexible hose.

4. Remove front shock absorber with coil spring

  1. Remove the 2 bolts and nuts on the lower side of the shock absorber assy front lh.

Notice

: when removing the bolt, stop the bolt from rotating and loosen the nut.

  1. Remove the 3 nuts on the upper side of the shock absorber assy front lh.
  2.  remove the front shock absorber with the coil spring.

5. Fix front shock absorber with coil spring

  1. Install 2 nuts and a bolt to the bracket at the lower side of the shock absorber assy front lh and secure it in a vise.

6. Remove shock absorber assy front lh

  1. Remove the front suspension support dust cover lh from the front suspension support subassy lh.
  2.  using sst, compress the front coil spring lh.

    Sst 0972730021

N

otice

: do not use an impact wrench. It will damage the sst.

  1. Using sst to hold the front coil spring seat upper lh, remove the nut.

    Sst 0972922031

  2. remove the front suspension support subassy lh, front suspension support lh dust seal, front coil spring seat upper lh, front coil spring insulator upper lh, front coil spring lh, front spring bumper lh and front coil spring insulator lower lh.

7. Inspect shock absorber assy front lh

  1. Compress and extend the shock absorber rod and check that there is no abnormal resistance or unusual sound during operation.

If there is any abnormality, replace the shock absorber with a new one.

Notice

: when disposing of the shock absorber, see disposal on page 2612.

8. Install shock absorber assy front lh

  1.  install the front coil spring insulator lower lh onto the shock absorber assy front lh.
  2.  install the front spring bumper lh to the shock absorber piston rod

  1. Using sst, compress the front coil spring lh.

    Sst 0972730021 Notice

    : do not use an impact wrench. It will damage the sst.

  2.  install the front coil spring lh to the shock absorber assy front lh.

    Hint

    : fit the lower end of the front coil spring lh into the gap of the spring lower seat.

  1. Install the front coil spring insulator upper lh as shown in the illustration.

  1. Install the front coil spring seat upper lh to the shock absorber assy front lh with the mark facing the outside of the vehicle.
  2.  install the front suspension support lh dust seal and front suspension support subassy lh.

  1. Using sst to hold the front coil spring seat upper lh, install a new nut.

    Sst 0972922031
    torque: 47 nvm (479 Kgfcm, 35 ftlbf)

  2.  remove the sst.
  3.  install the front suspension support dust cover lh.

  1. Apply mp grease no.2 Into the suspension support sub assy lh.

Caution

: do not touch grease on rubber surface of upper support.

9. Install front shock absorber with coil spring

  1. Install the shock absorber with the 2 bolts.
  2.  install the 3 nuts to the upper side of front shock absorber with coil spring.

    Torque: 39 nvm (398 Kgfcm, 29 ftlbf)

  1. Install the 2 bolts and nuts to the lower side of front shock absorber with coil spring.

    Torque: 153 nvm (1,560 Kgfcm, 113 ftlbf)

N

otice

: when installing bolt, stop the bolt from rotating and torque the nut.

10. Install front flexible hose

  1. W/ abs: install the front flexible hose and speed sensor front lh with the bolt.

    Torque: 29 nvm (296 Kgfcm, 21 ftlbf)

  2.  w/o abs: install the front flexible hose with the bolt.

    Torque: 29 nvm (296 Kgfcm, 21 ftlbf)

11. Install front stabilizer link assy lh

  1.  install the front stabilizer link assy lh with the nut.

    Torque: 74 nvm (755 Kgfcm, 55 ftlbf)

Hint

: if the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud.

12. Install front wheel torque: 103 nvm (1,050 Kgfcm, 76 ftlbf)

13. Inspect and adjust front wheel alignment

Front shock absorber with coil spring
...

Disposal
1. Dispose shock absorber assy front lh  fully extend the shock absorber piston rod.  using a drill, make a hole in the cylinder as shown in the illustration to discharge the gas ...

Other materials:

Registering a Bluetooth audio player for the first time
To use the Bluetooth Audio, it is necessary to register an audio player with the system. Once the player has been registered, it is possible to use the Bluetooth Audio. For details about registering a Bluetooth device 1 Turn the Bluetooth connection setting of your audio player on. 2 Press ...

Steering wheel audio switches
Some audio features can be controlled using the switches on the steering wheel. Operation may differ depending on the type of audio system or navigation system. For details, refer to the manual provided with the audio system or navigation system. Operating the audio system using the steering whe ...

Cruise control
Concept Using this system, a desired speed can be adjusted using the buttons on the steering wheel. The system maintains the desired speed. The system accelerates and brakes automatically as needed. General information Depending on the vehicle setting, the cruise control settings may change under c ...

2011-2022 Copyright www.tcorolla.net