Toyota Corolla (E120): Outer rear view mirror assy lh

Replacement

Hint

:

  • installation is according to the reverse order of the removal.
  • In the rh side, work in the same procedure as in the lh side.

1. Remove front armrest assy lh

2. Remove power window regulator master switch assy (w/ power window)

3. Remove front armrest base panel upper lh (w/o power window)

4. Remove front door window regulator handle assy (w/o power window)

5. Remove front door lower frame bracket garnish lh

6. Remove front door trim board sub–assy lh

7. Remove outer rear view mirror assy lh

  1.  remove the 3 nuts and the rear view mirror assembly lh, and then disconnect the connector.

8. Install outer rear view mirror assy lh

torque: 8.0 Nvm (81 kgfvcm, 71 in.Vlbf)

    Share this page:

    Other materials:

    Selecting, fast-forwarding and reversing tracks/files/songs
    ■ Selecting a track/file/song Press the “∧” or “∨” button on “SEEK/TRACK” or turn the “TUNE/ SCROLL” knob to select the desired track/file/song number. To fast-forward or reverse, press and hold the “∧” or “∨” button on “SEEK/TRACK”. ...

    Uniform Tire Quality Grading
    This information has been prepared in accordance with regulations issued by the National Highway Traffic Safety Administration of the U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. ...

    Circuit description
    The throttle position sensor is mounted in the throttle body and detects the throttle valve opening angle. When the throttle valve is fully closed, a voltage of approximately 0.3 To 1.0 V is applied to terminal vta of the ecm. The voltage applied to terminal vta of the ecm increases in pro ...