Toyota Corolla (E170): Other functions

■ Switching between outside air and recirculated air modes

Press The mode switches between outside air mode (indicator off) and recirculated air.

The mode switches between outside air mode (indicator off) and recirculated air mode (indicator on) each time ■ Defogging the windshield is pressed.

■ Defogging the windshield

Defoggers are used to defog the windshield and front side windows.

Press The dehumidification function operates and fan speed increases..

The dehumidification function operates and fan speed increases.

Set the outside/recirculated air mode button to the outside air mode if the recirculated air mode is used. (It may switch automatically.) To defog the windshield and the side windows early, turn the air flow and temperature up.

To return to the previous mode, press ■ Defogging the rear window and outside rear view mirrors again when the windshield is defogged.

■ Defogging the rear window and outside rear view mirrors

Defoggers are used to defog the rear window, and to remove raindrops, dew and frost from the outside rear view mirrors.

Press The defoggers will automatically turn off after a period of time..

The defoggers will automatically turn off after a period of time.

    Share this page:

    Other materials:

    Dialing from the contacts list
    You can dial a number from the contact data imported from your cellular phone. The system has one contact for each registered phone. Up to 2500 contacts may be stored in each contact. 1 Display the phone screen. 2 Select “Contacts” tab. 3 Choose the desired contact to call from the list. ...

    Seat belt warning lamp for driver’s seat does not operate
    Wiring diagram Inspection procedure 1 Check combination meter assy Ground terminal c9–12 on the combination meter side. check that the warning lightlights up. Ok: warning light lights up. 2 Inspect front seat inner belt assy lh Disconnect the front seat inner belt ...

    Inspection procedure
    Hint: start the inspection from step 1 in case of using the hand–held tester and start from step 2 in case of not using the hand–held tester. 1 Perform active test by hand–held tester(abs warning light) Check that ”on” and ”off” of the abs warning light can be shown on the ...