Toyota Corolla (E120) 2002–2008 Repair Manual / Wiper & washer / Wiper and washer system / On–vehicle inspection
Toyota Corolla (E120): On–vehicle inspection
1. Washer motor
- Operation check
- pour the water into the washer jar with the washer motor and the pump installed to the washer jar assy.
- Connect the battery (+) to terminal 2 of the washer motor and the pump, the battery (–) to terminal 1 of the washer motor and the pump. Check that the water comes out from the washer jar.
Other materials:
Precaution
1. Check that the battery cables are connected to the correct terminals.
2. Disconnect the battery cables when the battery is given a quick charge.
3. Do not perform tests with a high voltage insulation resistance tester.
4. Never disconnect the battery while the engine is running.
5. Check that ...
Cruise control actuator assy
Replacement
1. Remove cruise control actuator cover
Disengage the 2 claws, then remove the cruise control actuator
cover.
2. Separate accelerator control cable assy
Loosen the double nut and separate the accelerator control
cable assy.
3. Separate accelerator auto drive ca ...
Inspection procedure
1 Inspect cruise control actuator assy
Turn the ignition switch to off.
disconnect the cruise control actuator assy connector.
measure the resistance between terminals 1 (mo) and 2
(mc) of cruise control actuator assy.
Hint:
if control plate position is fully opened or ...