Toyota Corolla (E120) 2002–2008 Repair Manual / Heater & air conditioner / Air conditioning system / On–vehicle inspection
Toyota Corolla (E120): On–vehicle inspection
1. Inspect pressure switch no.1.
- Magnetic clutch control: inspect pressure switch operation.
- Set on the manifold gauge set.
- Connect the positive (+) lead from the ohmmeter to terminal 4 and the negative (–) lead to terminal 1.
- Check continuity between terminals when refrigerant pressure is changed, as shown in the illustration.
If operation is not as specified, replace the pressure switch.
- Cooling fan control: inspect pressure switch operation.
- Connect the positive (+) lead from the ohmmeter to terminal 2 and the negative (–) lead to terminal 3.
- Check continuity between terminals when refrigerant pressure is changed, as shown in the illustration.
If operation is not as specified, replace the pressure switch.
2. Cooler compressor assy w/magnetic clutch
- connect the positive (+) lead from the battery to terminal and the negative (–) lead to the body ground.
- check that the magnetic clutch energized.
If operation is not as specified, replace the magnet clutch assy.
Other materials:
Fuel
Preparation
Sst
Recomended tools
Ssm
Equipment
...
Circuit description
The airbag sensor front lh circuit consists of the airbag sensor assy center
and airbag sensor front lh.
Dtc b1158/b1159/16 is recorded when malfunction is detected in the airbag sensor
front lh circuit.
Wiring diagram
...
Replacement
1. Drain brake fluid
Notice:
wash the brake fluid off immediately if it comes into contact with any painted
surface.
2. Remove air cleaner cap sub–assy
3. Remove air cleaner case sub–assy
remove the air cleaner element, then remove the 3 bolts and air
cleaner case sub–assy.
...