Toyota Corolla (E120) 2002–2008 Repair Manual / Engine control system / Sfi system / On–vehicle inspection
Toyota Corolla (E120): On–vehicle inspection
1. Inspection throttle body idle speed control valve assy
Notice
:
- it is impossible to check the resister value and the operation of isc valve by itself, because the isc valve has an ic circuit inside it, which transforms the duty signal from the ecm to the derive signal.
- After checking, erase the dtc.
- Clear the dtc after inspection.
Hint
: when the isc valve system has malfunctions except for its adherence, dtc p0505 is detected.
- Operation inspection.
- Connect the isc connector to the isc valve.
- Check the isc valve movement when the ignition
switch is turned on.
Movement: half open " fully close " fully open " half open
Hint: isc valve moves within 0.5 Second.
Other materials:
Window lock switch
Press the switch to lock the passenger window switches.
Use this switch to prevent children from accidentally opening or closing a passenger
window.
■The power windows can be operated when
► Vehicles without a smart key system
The engine switch is in the “ON” position.
υ ...
Cruise control actuator assy
Replacement
1. Remove cruise control actuator cover
Disengage the 2 claws, then remove the cruise control actuator
cover.
2. Separate accelerator control cable assy
Loosen the double nut and separate the accelerator control
cable assy.
3. Separate accelerator auto drive ca ...
Inspection procedure
1 Inspect terminal voltage(idl)
Remove the cruise control ecu assy with connector still
connected.
disconnect the ecm connector.
turn the ignition switch to on.
measure voltage between terminal 13 (idl) of cruise control
ecu assy connector and body ground when the ...