Toyota Corolla (E120) 2002–2008 Repair Manual / Clutch / Clutch start switch assy (mtm) / On–vehicle inspection
Toyota Corolla (E120): On–vehicle inspection
1. Check clutch start system
- Check that the engine does not start when the clutch pedal is released.
- check that the engine starts when the clutch pedal is fully depressed.
If necessary, replace the clutch start switch assy.
Other materials:
Valve clearance
Adjustment
1. Remove cylinder head cover no.2
Remove the 2 nuts, 2 clips and cylinder head cover.
2. Disconnect engine wire
Remove the 5 clamps from the 5 clamp brackets.
Disconnect the 4 ignition coil connectors.
Remove the bolt and nut installing the engine wire ...
Inspection procedure
Hint:
this dtc chart is on the premise that the engine is cranked normally.
If the engine is not cranked, proceed
to the problem symptoms table on page 05–42.
Read freeze frame data using the hand-held tester or the obd ii scan
tool. Freeze frame data records
the engine conditions ...
Registering and connecting from the “Bluetooth* Setup” screen
To display the screen shown below, press the “SETUP” button and select “Bluetooth*”
on the “Setup” screen.
1 Select to connect the device to be used with multimedia system.
2 Select to register a Bluetooth® device to be used with multimedia system.
3 Select to set detailed Bluet ...