Toyota Tacoma manuals

Toyota Corolla Repair Manual: On–vehicle inspection

1. Inspection throttle body idle speed control valve assy

Notice:

Notice

:

Hint

: when the isc valve system has malfunctions except for its adherence, dtc p0505 is detected.

  1. Operation inspection.
  1.  Connect the isc connector to the isc valve.
  2.  Check the isc valve movement when the ignition switch is turned on.

    Movement: half open " fully close " fully open " half open

Hint: isc valve moves within 0.5 Second.

Sfi system
...

Inspection
1. Intake air flow meter sub–assy Inspect the intake air flow meter resistance.  Using an ohmmeter, measure the resistance between terminals tha and e2. Resistance: at –20 c ( ...

Other materials:

On–vehicle inspection
1. Check fuel pump operation Connect the hand–held tester to the dlc3.  turn the ignition switch on and hand–held tester main switch on. Notice: do not start the engine.  select the active test mode on the hand–held tester.  please refer to the hand–held tester ope ...

Glossary of sae and toyota terms
This glossary lists all sae–j1930 terms and abbreviations used in this manual in compliance with sae recommendations, as well as their toyota equivalents. ...

Adjustment
1. Inspect and adjust clutch pedal sub–assy Turn over the floor carpet.  check that the pedal height is correct. Pedal height from asphalt sheet: 135.8 – 145.8 Mm (5.346 – 5.740 In.)  adjust the pedal height. Loosen the lock nut and turn the stopper bolt until the h ...

© 2011-2024 Copyright www.tcorolla.net