Toyota Corolla (E120) 2002–2008 Repair Manual / Diagnostics / Sfi system / System voltage / Monitor description
Toyota Corolla (E120): Monitor description
The battery supplies electricity to the ecm even when the ignition switch is off. This electricity allows the ecm store data such as dtc history, freeze frame data, fuel trim values, and other data. If the battery voltage falls below a minimum level, the ecm will conclude that there is a fault in the power supply circuit. At the next engine start, the ecm will turn on the mil and a dtc will be set.
Monitor strategy
*1: The dtc is set immediately. The mil will be illuminated after the next engine start.
Typical enabling conditions
Typical malfunction thresholds
Wiring diagram
Other materials:
Starting the engine
1 Check that the parking brake is set.
► Vehicles without a multi-information display
2 Continuously variable transmission: Check that the shift lever is set in P.
Firmly depress the brake pedal.
Manual transmission: Check that the shift lever is set in N. Firmly depress the
clutch peda ...
Circuit description
The side airbag sensor assy (rh) circuit consists of the diagnosis circuit
and lateral deceleration sensor, etc.
It receives signals from the lateral deceleration sensor, judges whether or not
the srs must be activated,
and detects diagnosis system malfunction.
Dtc b1140/32 is recorded wh ...
Circuit description
The park/neutral position switch detects the shift lever position and sends
signals to the ecm.
Monitor description
The park/neutral position switch detects the gearshift position and sends a
signal to the ecm.
For security, the park/neutral position switch detects the gearshift positio ...