Toyota Tacoma manuals

Toyota Corolla Repair Manual: Lubrication system

On–vehicle inspection

1. Check engine oil level

  1.  after warming up the engine and then 5 minutes after the engine stops, oil level should be between the ”l” and ”f” marks on the oil level gage.

If low, check for leakage and add oil up to the ”f” mark.

Notice

: do not fill with engine oil above the ”f” mark.

2. Check engine oil quality

  1. Check the oil for deterioration, entry of water, discoloring or thinning.

If the quality is visibly poor, replace the oil.

Oil grade: use api grade sl ”energy–conserving”, or ilsac multigrade engine oil.

Sae 5w–30 is the best choice for good fuel economy, and good starting in cold weather.

If sae 5w–30 is not available, sae 10w–30 may be used.

However, it should be replaced with sae 5w–30 at the next oil replacement.

3. Inspect oil pressure

  1.  disconnect the oil pressure switch connector.

  1. Using a 24 mm deep socket wrench, remove the oil pressure switch.

  1. Install the oil pressure gauge.
  2.  warm up the engine.
  3.  inspect the oil pressure.

Oil pressure:

  1. Apply adhesive to 2 or 3 threads of the oil pressure switch.

    Adhesive:
    part no. 08833–00080, Three bond 1344, loctite 242 or equivalent

  2.  using a 24 mm deep socket wrench, install the oil pressure switch.

    Torque: 15 nvm (153 Kgf·cm, 11 ft·lbf)

  3.  connect the oil pressure switch connector.
  4.  check for the engine oil leaks.
Lubrication
...

Oil pump assy
...

Other materials:

Optimal use of the multimedia system
On the “Sound Settings” screen, sound quality (Treble/Mid/ Bass), volume balance can be adjusted. How to adjust the sound settings and sound quality 1 2 3 Select “-” or “+” to adjust the treble, mid or bass to a level between -5 and 5. 4 5 Select “Front” or “Rear” to adjust the front/rear aud ...

Customization
Customizable features Your vehicle includes a variety of electronic features that can be personalized to suit your preferences. Programming these preferences requires specialized equipment and may be performed by your Toyota dealer. Customizing vehicle features ■ Changing by using the n ...

Cruise control actuator assy
Replacement 1. Remove cruise control actuator cover Disengage the 2 claws, then remove the cruise control actuator cover. 2. Separate accelerator control cable assy Loosen the double nut and separate the accelerator control cable assy. 3. Separate accelerator auto drive ca ...

© 2011-2024 Copyright www.tcorolla.net