Toyota Tacoma manuals

Toyota Corolla Repair Manual: Key confinement prevention function does not work properly (unlock warning switch circuit)

Toyota Corolla Repair Manual / Diagnostics / Power door lock control system / Key confinement prevention function does not work properly (unlock warning switch circuit)

Circuit description

The unlock warning switch turns on when the key is inserted in the ignition key cylinder and the door courtesy switch turns on when the driver’s door is opened, and the integration relay monitors both switches conditions.

According to these switches conditions, the integration relay controls the door locking operation not to lock the doors while both switches are on, in order to prevent the key from being confined.

Wiring diagram

Inspection procedure

Inspection procedure

1 Inspect un–lock warning switch assy

  1. Remove the un–lock warning switch assy.
  2.  inspect the un–lock warning switch assy continuity, as shown in the illustration and table.

Standard:

2 Check wire harness

2 Check wire harness (un–lock warning switch  instrument panel j/b)

  1. Disconnect the un–lock warning switch assy and instrument panel j/b connectors.
  2.  check the continuity between the terminals of the un–lock warning switch assy and instrument panel j/b connectors, as shown in the illustration and table.

    Standard (check for open):

3 Inspect front door courtesy lamp switch assy (driver’s side)

3 Inspect front door courtesy lamp switch assy (driver’s side)

  1. Remove the courtesy lamp switch.
  2. inspect the courtesy lamp switch continuity, as shown in the illustration and table.

Standard:

4 Check wire harness

4 Check wire harness (front door courtesy lamp switch assy [driver’s side]  instrument panel j/b)

  1. Disconnect the courtesy lamp switch and instrument panel j/b connectors.
  2. check the continuity between the terminals of the courtesy lamp switch and instrument panel j/b connectors, as shown in the illustration and table.

Standard (check for open):

Replace integration relay

Replace integration relay

Inspection procedure
1 Check door lock When the door does not operate manually, proceed to ”a”.  when the door does not operate via the key, proceed to ”b”. 2 Inspect door lock control switch W/ ...

Wireless door lock control system
...

Other materials:

Inspection procedure
Hint: the switch described in this text is a switch for transmitting signals which is built in the door control transmitter. 1 Check wireless door lock control functions Normal 2 Replace transmitter battery with normal one After replacing the transmitter battery with a new or normal o ...

Mechanical system tests
1. Perform mechanical system tests Measure the stall speed. The object of this test is to check the overall performance of the transaxle and engine by measuring the stall speeds in the d and r positions. Notice: Do the test at normal operating atf temperature 50 to 80 °c (122 to ...

If the shift lever cannot be shifted from P (except vehicles with a manual transmission)
If the shift lever cannot be shifted with your foot on the brake pedal, there may be a problem with the shift lock system (a system to prevent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency ...

© 2011-2024 Copyright www.tcorolla.net