Toyota Tacoma manuals

Toyota Corolla Repair Manual: Insufficient coolant temperature for closed loop fuel control

Toyota Corolla Repair Manual / Diagnostics / Sfi system / Insufficient coolant temperature for closed loop fuel control

Dtc p0125 insufficient coolant temperature for closed loop fuel control

Inspection procedure
Hint: read freeze frame data using the hand-held tester or the obd ii scan tool. Freeze frame data records the engine conditions when a malfunction is detected. When troubleshooting, it is usefu ...

Circuit description
Refer to dtc p0115 Dtc no. Dtc detection condition Trouble area P0125 If the engine coolant temperature (ect) was less than –6.6 °C (20 °F) when starting the e ...

Other materials:

Check short circuit
If the wire harness is ground shorted as shown in fig. 5, Locate the section by conducting a resistance check with the body ground in step (b). Check the resistance with the body ground.  Disconnect connectors a and c and measure the resistance between terminals 1 and 2 ...

Correct driving posture
1 Adjust the angle of the seatback so that you are sitting straight up and so that you do not have to lean forward to steer. 2 Adjust the seat so that you can depress the pedals fully and so that your arms bend slightly at the elbow when gripping the steering wheel. 3 Lock the head restraint ...

Disposal
1. Dispose shock absorber assy front lh  fully extend the shock absorber piston rod.  using a drill, make a hole in the cylinder as shown in the illustration to discharge the gas inside. Caution: when drilling, chips may fly out, work carefully. The gas is colorless, o ...

© 2011-2024 Copyright www.tcorolla.net