Toyota Corolla (E120): Inspection procedure

1 Inspect fuse(stop)

  1. Turn the ignition switch to off.
  2.  remove the stop fuse from the instrument panel j/b.
  3.  check continuity of the stop fuse.

    Ok: continuity

2 Inspect stop lamp switch assy

2 Inspect stop lamp switch assy

  1. Disconnect the stop lamp switch assy connector.
  2. check continuity between each terminal of stop lamp switch assy.

    Ok:

3 Inspect cruise control actuator assy

3 Inspect cruise control actuator assy

  1. Turn the ignition switch to off.
  2.  disconnect the cruise control actuator assy connector.
  3. measure resistance between terminals 3 (l) and 4 (gnd) of the cruise control actuator assy.

    Ok: resistance: 34.65 – 42.35 Ω

4 Check harness and connector(between cruise control actuator

4 Check harness and connector(between cruise control actuator assy and body ground)

  1. Check continuity between the terminal 4 (gnd) of the cruise control actuator assy and body ground.

    Ok: continuity

5 Check harness and connector(between cruise control ecu assy

5 Check harness and connector(between cruise control ecu assy and cruise control actuator assy)

  1. Check for open and short circuit in harness and connector between cruise control ecu assy and cruise control actuator assy (actuator magnetic clutch)

Check and replace cruise control ecu assy

Check and replace cruise control ecu assy

    Share this page:

    Other materials:

    Window lock switch
    Press the switch to lock the passenger window switches. Use this switch to prevent children from accidentally opening or closing a passenger window. ■The power windows can be operated when ► Vehicles without a smart key system The engine switch is in the “ON” position. υ ...

    Replacing a flat tire
    1 Chock the tires. 2 For vehicles with steel wheels, remove the wheel ornament using the wrench. To protect the wheel ornament, place a rag between the wrench and the wheel ornament, as shown in the illustration. 3 Slightly loosen the wheel nuts (one turn). 4 Turn the tire jack portion ...

    Malfunction in clock
    Wiring diagram Inspection procedure 1 Inspect fuse Check the continuity in cig fuse.  check the continuity in dome fuse. 2 Inspect harness or connector Check voltage.  Remove the clock assy with connector still connected.  Measure voltage between ter ...