Toyota Corolla (E120): Inspection procedure
1 Check door lock
2 Check wire harness (tvip ecu door lock)
- Disconnect the tvip ecu and door lock connectors.
- check the continuity between the terminals of the tvip ecu and door lock connectors, as shown in the illustration and table.
Standard:
3 Check wire harness (door lock body ground)
- Disconnect the door lock connector.
- check the continuity between the terminal of the door lock connector and the body ground, as shown in the illustration and table.
Standard:
Proceed to next circuit inspection shown on problem symptoms table
Other materials:
Correct driving posture
1 Adjust the angle of the seatback so that you are sitting straight up and so
that you do not have to lean forward to steer.
2 Adjust the seat so that you can depress the pedals fully and so that your arms
bend slightly at the elbow when gripping the steering wheel.
3 Lock the head restraint ...
Front seats
Adjustment procedure
► Manual seat
1 Seat position adjustment lever
2 Seatback angle adjustment lever
3 Vertical height adjustment lever (driver’s side only)
► Power seat (driver’s side only)
1 Seat position adjustment switch
2 Seatback angle adjustment switch
3 Seat cush ...
Inspection procedure
1 Check seat position air bag sensor
Sst 09843–18040
Turn the ignition switch to on, and wait at least for 20 seconds.
clear the dtc stored in memory .
turn the ignition switch to lock, and wait at least for 20
seconds.
turn the ignition switch to on, and wait at ...