Toyota Corolla (E120) 2002–2008 Repair Manual / Diagnostics / Toyota vehicle intrusion protection system / Glass breakage sensor circuit / Inspection procedure
Toyota Corolla (E120): Inspection procedure
1 Check security indicator light
- Set the system in 30 seconds after filliping the security indicator to check if the alarm is triggered.
2 Check glass breakage sensor ecu (glass breakage sensor)
- Check the continuity and voltage of the glass breakage sensor ecu, as shown in the illustration and table.
Standard:
3 Check wire harness (tvip ecu glass breakage sensor ecu)
- Disconnect the tvip ecu and glass breakage sensor ecu connectors.
- check the continuity and between the connectors on the harness side, as shown in the illustration and table.
Standard:
4 Check wire harness (glass breakage sensor ecu body ground)
- Disconnect the glass breakage sensor ecu connector.
- check the continuity between the terminal of the glass breakage sensor ecu connector and the body ground, as shown in the illustration and table.
Standard:
Check and replace tvip ecu
Other materials:
Stopping the engine
1 Stop the vehicle.
2 Continuously variable transmission: Shift the shift lever to P.
Manual transmission: Shift the shift lever to N.
3 Set the parking brake. 4 Press the engine switch.
5 Vehicles without a multi-information display: Release the brake pedal (continuously
variable transmission ...
Transmission valve body assy (atm)
Replacement
1. Remove engine under cover lh
2. Drain automatic transaxle fluid
remove the drain plug, gasket and drain atf.
install a new gasket and drain plug.
Torque: 17.5 Nvm (178 Kgf·cm, 13 ft·lbf)
3. Remove automatic transaxle oil pan sub–assy
Remove the 18 ...
Adjustment
1. Inspect shift lever position
When shifting the shift lever to each position, make sure
that it moves smoothly, and the position indicator displays
correctly.
Positions which can be shifted without pressing the
shift lever knob button
r " n " d, l " 2 " d &quo ...