Toyota Tacoma manuals

Toyota Corolla Repair Manual: Inspection procedure

Hint

: start the inspection from step 1 in case of using the hand–held tester and start from step 2 in case of not using hand–held tester.

1 Inspect brake actuator assy

  1. Select the datalist mode on the hand–held tester.
  2.  check the operation sound of the abs pump motor when operating it with the hand–held tester.

    Ok: the operation sound of the abs pump motor should be heard.

2 Inspect skid control ecu terminal voltage(+bm terminal voltage)

2 Inspect skid control ecu terminal voltage(+bm terminal voltage)

  1. Disconnect the skid control ecu connector.
  2.  measure the voltage between terminal +bm (24) and gnd (23) of skid control ecu harness side connector.

    Ok: the operation sound of the abs pump motor should be heard.

Replace brake actuator assy

Replace brake actuator assy

Circuit description
Wiring diagram ...

Malfunction in abs ecu
Dtc alwayson malfunction in abs ecu ...

Other materials:

Cleaning and protecting the vehicle exterior
Perform the following to protect the vehicle and maintain it in prime condition: ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust. ● Wash the vehicle body using a sponge or soft cloth, such a ...

Customization
Customizable features Your vehicle includes a variety of electronic features that can be personalized to suit your preferences. Programming these preferences requires specialized equipment and may be performed by your Toyota dealer. Customizing vehicle features ■ Changing by using the n ...

Entire combination meter does not operate
Wiring diagram Inspection procedere 1 Check fuse Check that continuity exists of dome fuse.  check that continuity exists of gauge fuse.  check that continuity exists of am1 fuse. 2 Inspect combination meter assy Check continuity.  Disconnect the ”c9 ...

© 2011-2024 Copyright www.tcorolla.net