Toyota Corolla (E120): Inspection procedure
Hint
: read freeze frame data using the hand-held tester or the obd ii scan tool. Freeze frame data records the engine conditions when a malfunction is detected. When troubleshooting, it is useful for determining whether the vehicle was running or stopped, the engine was warmed up or not, the air–fuel ratio was lean or rich, etc. At the time of the malfunction.
1 Check cooling system
- Check that there is a defect in the cooling system which causes overcool, such as abnormal radiator fan operation, modified cooling system and so on.
2 Inspect thermostat
3 Check other dtc output(in addition to dtc p0128)
- Connect the hand–held tester or the obd ii scan tool to the dlc3.
- turn the ignition switch on and push the hand–held tester or the obd ii scan tool main switch on.
- select the item ”diagnosis / enhanced obd ii / dtc info / current codes”.
- read the dtcs.
Result:
Hint
: if any other codes besides p0128 is output, perform the troubleshooting for those dtcs first.
Replace ecm
Other materials:
How to proceed with troubleshooting
The hand–held tester can be used at step 3, 4, 6, 9.
1 Vehicle brought to workshop
2 Customer problem analysis
3 Connect the obd ii scan tool or hand–held tester to dlc3
4 Check and clear dtc and freeze frame data
5 Visual inspection
6 Setting the check mode diagnosis
7 Proble ...
Exterior/interior trim
Preparation
Recomended tools
Equipment
Vehicle control system
Preparation
Recomended tools
...
Brake fluid
Bleeding
Notice:
wash the brake fluid off immediately if it comes into contact with any painted
surface.
Hint:
if any work is done on the brake system or if air in the brake lines is
suspected, bleed the air from the system.
1. Fill reservoir with brake fluid
fluid: sae j1703 or fmvss no. ...