Toyota Corolla (E120) 2002–2008 Repair Manual / Diagnostics / Sfi system / Engine coolant temp. Circuit
range/performance problem / Inspection procedure
Toyota Corolla (E120): Inspection procedure
Hint
:
- if dtcs p0115, p0116, p0117, p0118 and p0125 are output simultaneously, the engine coolant temperature sensor circuit may be open or short. Perform the troubleshooting of dtc p0115, p0117 or p0118 first.
- Read freeze frame data using the hand-held tester or the obd ii scan tool. Freeze frame data records the engine conditions when a malfunction is detected. When troubleshooting, it is useful for determining whether the vehicle was running or stopped, the engine was warmed up or not, the air–fuel ratio was lean or rich, etc. At the time of the malfunction.
Replace engine coolant temperature sensor
Other materials:
About this vehicle
1. Structural outline
2. Notice about vehicle condition when jacking up
vehicle
(a) notice for using jack and safety stand
(B) notice for using swing arm type lift
(C) notice for using plate type lift
3. Damage diagnosis
4. Components
(a) front bumper
(B) side mu ...
Inspection procedure
1 Check un–lock warning switch assy
Disconnect the key unlock warning switch connector.
check the continuity between the terminals of the key unlock
warning switch connector, as shown in the illustration
and table.
Standard:
2 Check wire harness (tvip ecu unlock warni ...
On–vehicle inspection
1. Inspect sliding roof function
check the slide opening operation (manual).
Turn the ignition switch on.
When keeping operating the sliding roof switch to the open side,
check that the roof glass will
slide and be fully opened.
check the slide closing ...