Toyota Corolla (E120): Inspection
1. Inspect driver’s door lock
- Inspect the door lock motor operation.
Standard:
If the result is not as specified, replace the door lock assembly.
- Inspect the door lock and unlock switch continuity.
Standard:
If the result is not as specified, replace the door lock assembly.
- inspect the position switch continuity.
Standard:
If the result is not as specified, replace the door lock assembly.
2. Inspect passenger’s door lock
- Inspect the door lock motor operation.
Standard:
If the result is not as specified, replace the door lock assembly.
- Inspect the door lock and unlock switch continuity.
Standard:
If the result is not as specified, replace the door lock assembly.
- inspect the position switch continuity.
Standard:
If the result is not as specified, replace the door lock assembly.
3. Inspect rear door lock lh
- Inspect the door lock motor operation.
Standard:
If the result is not as specified, replace the door lock assembly
4. Inspect rear door lock rh
- Inspect the door lock motor operation.
Standard:
If the result is not as specified, replace the door lock assembly.
5. Inspect power window regulator master switch assy
- W/ power window: inspect the door lock control switch continuity.
Standard:
If the result is not as specified, replace the switch.
- W/o power window: inspect the door lock control switch continuity.
Standard:
If the result is not as specified, replace the switch.
6. Inspect door control switch assy
- Passenger’s side switch: inspect the door lock control switch continuity.
Standard:
If the result is not as specified, replace the switch.
Other materials:
Cd sound skips
Inspection procedure
1 Disc cleaning
Disk cleaning
) if the disk gets dirty, clean the disk by wiping the surface
from the center to outside in the radial directions
with a soft cloth.
Notice:
do not use a conventional record cleaner or anti–static preservative.
Standard: ...
Circuit description
Hint:
these dtcs indicate a malfunction related to the primary circuit.
If dtc p0351 is displayed, check the no.1 Ignition coil with igniter
circuit.
If dtc p0352 is displayed, check the no.2 Ignition coil with igniter
circuit.
If dtc p0353 is displayed, check the no.3 Ignition coil ...
Adjustment
1. Put vehicle these conditions
tire inflation pressure is the specified value .
start the engine.
2. Adjust fog light aim
The fog light aim can be adjusting by moving the aiming
screw in the vertical direction.
Hint:
the optical aim moves upward when turning a scr ...