Toyota Corolla (E120): Inspection
1. Inspect outer mirror switch assy
- Inspect the mirror switch continuity.
- Left side for left/right adjustment switch: inspect the mirror switch continuity
Standard (left side):
If the result is not as specified, replace the switch assembly.
- Right side for left/right adjustment switch: inspect the mirror switch continuity.
Standard (right side):
If the result is not as specified, replace the switch assembly.
2. Inspect outer rear view mirror assy lh
- Disconnect the outer rear view mirror assembly lh connector.
- inspect the mirror motor operation.
- Apply battery voltage as shown in the table.
Standard:
If the result is not as specified, replace the mirror assembly.
3. Inspect outer rear view mirror assy rh
- Disconnect the outer rear view mirror assembly rh connector.
- inspect the mirror motor operation.
- Apply battery voltage as shown in the table.
Standard:
If the result is not as specified, replace the mirror assembly.
Other materials:
Warning light and warning buzzer list
*1: Parking brake engaged warning buzzer:
*2: Open door warning buzzer:
*3: Vehicles with a drive monitor display
*4: Vehicles with a multi-information display
*5: Driver’s seat belt buzzer:
Vehicles without a smart key system: The driver’s seat belt buzzer sounds to alert
the d ...
Circuit description
Refer to dtc p0130
Dtc no
Dtc detection condition
Trouble area
P0136
The following condition (a) or (b) continues for 300 seconds or
more:
During driving with the engine warmed up, heated oxygen
sensor o tp t does not change
output change.
he ...
Inspection procedure
1 Check harness and connector(transmission control switch –
body ground)
Disconnect the transmission control switch connector of
shift lever assy.
measure the resistance according to the value(s) in the
table below.
Standard:
2 Inspect transmission control switch
M ...