Toyota Corolla (E120): Inspection
1. Inspect front seat inner belt assy lh
- When fastening the seat belt (buckle switch on).
- Inspect the continuity and resistance between the terminals.
Standard:
If the result is not as specified, replace the inner belt.
- When releasing the seat belt (buckle switch off).
- Inspect the continuity and resistance between the terminals.
Standard:
If the result is not as specified, replace the inner belt.
2. Inspect front seat inner belt assy rh
- short between connector terminals 1 and 2 for the occupation detection sensor (seat is occupied).
- When fastening the seat belt (buckle switch is on and seat is occupied).
- Inspect the continuity between the terminals of the connector for the warning switch.
Standard:
- When releasing the seat belt (buckle switch is off and seat is occupied).
- Inspect the continuity between the terminals of the connector for the warning switch.
Standard:
- Disconnect the occupation detection sensor connector (seat is not occupied).
- When fastening the seat belt (buckle switch is not on and seat is occupied).
- Inspect the continuity between the terminals of the connector for the warning switch.
Standard:
- When releasing the seat belt (buckle switch is not off and seat is occupied).
- Inspect the continuity between the terminals of the connector for the warning switch.
Standard:
If the result is not as specified, replace the inner belt.
Other materials:
Front seats
Adjustment procedure
► Manual seat
1 Seat position adjustment lever
2 Seatback angle adjustment lever
3 Vertical height adjustment lever (driver’s side only)
► Power seat (driver’s side only)
1 Seat position adjustment switch
2 Seatback angle adjustment switch
3 Seat cush ...
Inspection procedure
1 Inspect cruise control actuator assy
Turn the ignition switch to off.
disconnect the cruise control actuator assy connector.
measure the resistance between terminals 1 (mo) and 2
(mc) of cruise control actuator assy.
Hint:
if control plate position is fully opened or ...
Center stop lamp assy
Replacement
1. Remove package tray trim panel assy (w/o rear spoiler)
2. Remove center stop lamp assy (w/o rear
spoiler)
Remove the center stop light assy as shown in the illustlation.
3. Remove center stop lamp assy (w/ rear
spoiler)
Remove the 2 screws.
disconnect th ...