Toyota Corolla Repair Manual: How to proceed with troubleshooting
Troubleshoot in accordance with the procedure on the following pages.
1 Vehicle brought to workshop
2 Customer problem analysis check and symptom check
- Without applicable symptoms, proceed to ”a”.
- with applicable symptoms, proceed to ”b”.
3 Symptom simulation
4 Problem symptoms table
- Without applicable symptoms, proceed to ”a”.
- with applicable symptoms, proceed to ”b”.
5 Circuit inspection and part inspection
6 Perform troubleshooting in the following method, depending on malfunction symptom
- Terminals of ecu (seepage 05–703)
- on–vehicle inspection
7 Adjustment, repair or replacement
8 Confirmation test
End
Customer problem analysis check
Location
Terminals of ecu
1. Inspect tvip ecu
Inspect the ecu–b, dome and ecu–ig fuses.
disconnect the tvip ecu connector, and the continuity and voltage of
check each terminal of the disconnected
connector.
...
Other materials:
Replacement
1. Remove engine under cover rh
2. Drain coolant
3. Remove front wheel rh
4. Remove cylinder head cover no.2
Remove the 2 nuts, 2 clips and cylinder head cover.
5. Remove fan and generator v belt
Turn the v–ribbed belt tensioner slowly clockwise and
loosen it. Then, remove t ...
Front differential oil seal
Replacement
1. Drain manual transaxle oil
torque: 39.2 Nvm (400 Kgf·cm, 29 ft·lbf)
2. Remove front wheels
3. Remove engine under cover lh
4. Remove engine under cover rh
5. Drain transaxle oil
6. Remove front drive shaft assy lh
sst 09520–01010, 09520–24010 (09520–32040)
7. Remove fr ...
Integrated Universal
Remote Control
Concept
The integrated Universal Remote Control in the
interior mirror can operate up to 3 functions of
remote-controlled systems such as garage door
drives, barriers, or lighting systems.
General information
The Integrated Universal Remote Control replaces
up to 3 different hand-held transmitters. ...
