Toyota Corolla (E120) 2002–2008 Repair Manual / Diagnostics / ABS with EBD system / How to proceed with troubleshooting
Toyota Corolla (E120): How to proceed with troubleshooting
1 Vehicle brought to workshop
2 Customer problem analysis
3 Check and clear dtcs and freeze frame data
4 Problem symptom confirmation
Symptom does not occur: go to step 5
Symptom occurs: go to step 6
5 Symptom simulation
6 Dtc check
There is no output: go to step 7
There is output: go to step 8
7 Problem symptoms table
Check for fluid leakage and go to step 10
8 Dtc chart
9 Circuit inspection
Hint
: when 2 or more dtc’s are recorded, and the problem is not identified, perform circuit inspection of the other dtc’s.
10 Identification of problem
11 Repair
12 Comfirmation test
End
Hint
: step 3, 6, 9, 12: diagnostic steps permitting the use of the hand–held tester.
Fail safe function:
when a failure occurs in the abs system, the abs warning light is lit and the abs operation is prohibited.
In addition to this, when the failure which disables the ebd operation occurs, the brake warning light is lit as well and the ebd operation is prohibited.
Other materials:
Engine rear oil seal
Replacement
1. Remove manual transaxle assy (m/t transaxle)
2. Remove automatic transaxle assy (a/t transaxle)
3. Remove clutch cover assy (m/t transaxle)
remove the 6 bolts and clutch cover.
4. Remove clutch disc assy (m/t transaxle)
5. Remove flywheel sub–assy (m/t transaxle ...
Deleting call histories
Select “Delete Call History” using
. ● Deleting outgoing call history
1 Select “Outgoing Calls” using .
2 Select the desired phone number using
and press
(YES).
To delete all outgoing call history data, press
(ALL) and then press
(YES).
● Deleting incoming call histo ...
Back up lamp assy lh
Replacement
1. Remove back up lamp assy lh
Remove the service hole cover.
remove the 2 nuts and disconnect the connector.
Using a mouldingremover, remove the 2 clips and back
up light assy lh.
2. Install back up lamp assy lh
Set the 2 clips on the back up ligh ...