Toyota Corolla (E120): Headlamp dimmer switch assy

Replacement

1. Remove steering column cover lwr

  1. Remove 3 screws and steering column cover lwr.

2. Remove headlamp dimmer switch assy

  1. Disconnect the connector.
  2.  release the claw and pull out the head light dimmer switch assy.
    Share this page:

    Other materials:

    Circuit description
    The variable valve timing (vvt) system includes the ecm, the oil control valve (ocv) and the vvt controller. The ecm sends a target ”duty–cycle” control signal to the ocv. This control signal, applied to the ocv, regulates the oil pressure supplied to the vvt controller. Camshaft timin ...

    Replacement
    1. Drain brake fluid Notice: wash the brake fluid off immediately if it comes into contact with any painted surface. 2. Remove front wheel rh 3. Remove front fender liner rh 4. Remove brake actuator with bracket  turn the latch of the actuator connector to disconnect the connector. ...

    Pre–check
    1. Pre–check Check that the cruise control actuator assy, acceleration wire, accelerator auto drive cable assy, and link assy are installed correctly and that the wire and link are securely connected. check that the operating movement of the acceleration pedal, cruise control actu ...