Toyota Corolla (E120): Front no.2 Speaker assy

Replacement

H

int

: components:

1. Remove front armrest assy lh

2. Remove power window regulator master switch assy (w/ power window)

3. Remove front armrest base panel upper lh (w/o power window)

4. Remove front door window regulator handle assy (w/o power window)

5. Remove front door lower frame bracket garnish lh

6. Remove front door trim board sub–assy lh

7. Remove front no.2 Speaker assy

  1. Open the part of service hole cover, then disconnect the connector.
  2.  remove the 2 nuts and front no. 2 Speaker assy.

8. Install front door window regulator handle assy (w/o power window)

    Share this page:

    Other materials:

    Antenna cord sub–assy
    Replacement Hint: components: 1. Remove instrument panel sub–assy upper Hint: refer to the procedure until the step, ”remove instrument panel sub–assy upper” of instrument panel sub–assy lower. Remove the related parts as long as the antenna cord sub–assy can be removed ...

    Back up lamp assy lh
    Replacement 1. Remove back up lamp assy lh Remove the service hole cover.  remove the 2 nuts and disconnect the connector. Using a mouldingremover, remove the 2 clips and back up light assy lh. 2. Install back up lamp assy lh Set the 2 clips on the back up ligh ...

    Replacement
    Hint: components: 1. Precaution 2. Disconnect battery negative terminal 3. Remove horn button assy Place the front wheels facing straight ahead.  using a torx socket wrench (t30), loosen the 2 torx screws until the groove along the screw circumference catches on the screw ca ...