Toyota Corolla (E120) 2002–2008 Repair Manual / Automatic transmission / trans / Front differential oil seal (atm)
Toyota Corolla (E120): Front differential oil seal (atm)
Replacement
1. Remove front wheels
2. Remove engine under cover rh
3. Remove engine under cover lh
4. Drain automatic transaxle fluid
- remove the drain plug, gasket and drain atf.
- install a new gasket and drain plug.
Torque: 17.5 Nvm (178 Kgf·cm, 13 ft·lbf)
5. Remove front drive shaft assy rh
6. Remove front drive shaft assy lh
7. Remove transaxle housing oil seal(rh)
- Using sst, pull out the oil seal.
Sst 09308–00010
8. Remove transaxle case oil seal(lh)
- Using sst, pull out the oil seal.
Sst 09308–00010
9. Install transaxle housing oil seal(rh)
- Using sst and a hammer, drive in a new oil seal.
Sst 09350–32014 (09351–32130, 09351–32150) oil seal drive in depth: 2.0 0.5 Mm (0.079 0.020 In.)
- coat the lip of the oil seal with mp grease.
10. Install transaxle case oil seal(lh)
- Using sst and a hammer, drive in a new oil seal.
Sst 09350–32014 (09351–32111, 09351–32130) oil seal drive in depth: 5.3 0.5 Mm (0.209 0.020 In.)
- coat the lip of the oil seal with mp grease.
11. Install front drive shaft assy lh
12. Install front drive shaft assy rh
13. Install engine under cover lh
14. Install engine under cover rh
15. Install front wheels
torque: 103 nvm (1050 Kgf·cm, 76 ft·lbf)
16. Add automatic transaxle fluid
17. Inspect automatic transaxle fluid
18. Inspect and adjust front wheel alignment
19. Check abs speed sensor signal (w/ abs)
Other materials:
Brake
Service data
Torque specification
Parking brake
Service data
Torque specification
...
Speedometer sensor (atm)
Replacement
1. Remove air cleaner case
2. Remove air cleaner hose no.1
3. Remove speedometer sensor
disconnect the connector.
remove the bolt and speedometer sensor assembly.
remove the clip and driven gear from the speedometer
sensor.
4. Install speedometer sensor
...
How to proceed with troubleshooting
Hint:
troubleshooting of the wireless door lock control system is based on
the premise that the power door
lock system is operating normally. Therefore, before troubleshooting the
wireless door lock control system,
first make certain that the the power door lock system is operating
...