Toyota Corolla (E120): Front differential oil seal

Replacement

1. Drain manual transaxle oil

torque: 39.2 Nvm (400 Kgf·cm, 29 ft·lbf)

2. Remove front wheels

3. Remove engine under cover lh

4. Remove engine under cover rh

5. Drain transaxle oil

6. Remove front drive shaft assy lh

 sst 09520–01010, 09520–24010 (09520–32040)

7. Remove front drive shaft assy rh

 sst 09520–01010, 09520–24010 (09520–32040)

8. Remove transaxle case oil seal

  1. Using sst, remove the transaxle case oil seal.

    Sst 09308–00010

9. Remove transmission case oil seal

  1. Using sst, remove the transmission case oil seal.

    Sst 09308–00010

10. Install transaxle case oil seal

  1. Coat a new oil seal lip with mp grease.
  2.  using sst and a hammer, install the transaxle case oil seal.

    Sst 09554–14010, 09950–70010 (09951–07200) drive in depth: 1.9 0.3 Mm (0.075 0.012 In.)

Notice

: be careful not to damage the oil seal lip.

11. Install transmission case oil seal

  1. Coat a new oil seal lip with mp grease.
  2. using sst and a hammer, install the transmission case oil seal.

    Sst 09554–14010, 09950–70010 (09951–07200) drive in depth: 9.9 0.3 Mm (0.390 0.012 In.) Notice

    : be careful not to damage the oil seal lip.

  3.  Install front drive shaft assy lh
  4.  Install front drive shaft assy rh
  5.  Install front wheels torque: 103 nvm (1,050 Kgf·cm, 76 ft·lbf)
  6.  Add manual transaxle oil

Oil grade: api gl–4 or gl–5

Oil grade: api gl–4 or gl–5 viscosity: sae 75 w–90
capacity:1.9 Liters (2.0 Us qts, 1.7 Lmp. Qts) torque: 39.2 Nvm (400 Kgf·cm, 29 ft·lbf)

16. Inspect and adjust manual transaxle oil

17. Inspect and adjust front wheel alignment

18. Check abs speed sensor signal

    Share this page:

    Other materials:

    Rear speaker assy
    Replacement Hint: components: 1. Remove rear door opening trim rh 2. Remove rear door opening trim lh 3. Remove bench type rear seat cushion assy( or 72–8) 4. Remove rear seat back assy (fixed type rear seat) 5. Remove rear seat back assy (separated type rear seat) 6. Remove rear seat side ...

    Malfunction in water temperature receiver gauge
    Wiring diagram Inspection procedure 1 Read value of hand–held tester Check output value of ecm.  Connect the hand–held tester to dlc3.  Turn the ignition switch to on and push the hand–held tester main switch on.  Select the data list mode on the hand–he ...

    Calculation formula for your vehicle
    1 Cargo capacity 2 Total load capacity (vehicle capacity weight) When 2 people with the combined weight of A lb. (kg) are riding in your vehicle, which has a total load capacity (vehicle capacity weight) of B lb. (kg), the available amount of cargo and luggage load capacity will be C lb. (kg ...