Toyota Corolla Repair Manual: Engine hood/door

Overhaul

1. Remove roof headlining assy 2. Remove sliding roof glass sub–assy  using a torx wrench (t25), remove the 4 screws the sliding roof glass.  pull the glass upward to remove it. ...

Hood

Adjustment Hint: since the centering bolt is used as a hood hinge and hood lock set bolt, the hood and hood lock can not be adjusted with it on. Substitute a bolt with washer for the centering ...

Other materials:

General information, Safety information
General information The BMW display key is supplied with an additional mechanical key. If the display key is used, the mechanical key should be carried with you, for instance in the wallet. The mechanical key is used like the integrated key. The display key supports all functions of the standard ...

Replacement
1. Remove clutch start switch assy  disconnect the clutch start switch assy connector.  remove the nut and clutch start switch assy from the clutch pedal support. 2. Install clutch start switch assy  install the clutch start switch assy with the nut. Torque: 15.68 Nv ...

Follow the correction procedures. (vehicles with a smart key system and with a drive monitor display)
After taking the specified steps to correct the suspected problem, check that the warning light turns off. ■SRS warning light This warning light system monitors the airbag sensor assembly, front impact sensors, side impact sensors (front door), side impact sensors (front), side impac ...