Toyota Corolla (E120) 2002–2008 Repair Manual / Diagnostics / Toyota vehicle intrusion protection system / Ecu power source circuit
Toyota Corolla (E120): Ecu power source circuit
Circuit description
This circuit provides power to operate the tvip ecu.
Wiring diagram
Inspection procedure
1 Check fuse (ecu–b)
- Remove the fuse from the instrument panel j/b.
- check the continuity of the fuse.
Standard: continuity
2 Check tvip ecu
- Disconnect the tvip ecu connector.
- measure the voltage between the terminals of the ecu connector, as shown in the illustration and table.
Standard:
3 Check wire harness (tvip ecu body ground)
- Disconnect the tvip ecu connector.
- check the connector on the harness side, as shown in the illustration and table.
Standard:
Check and replace tvip ecu
Other materials:
Check mode procedure
1. Dtc check (check mode)
Hint:
hand–held tester only:
compared to the normal mode, the check mode has more sensing
ability to detect malfunctions. Furthermore, the same diagnostic
items which are detected in the normal mode can also be
detected in the check mode.
Procedure for check m ...
Cruise control
Preparation
Sst
Recomended tools
Equipment
...
System description
The ecm uses signals from the vehicle speed sensor and crankshaft position
sensor to detect the actual
gear position (1st, 2nd, 3rd or o/d gear).
Then the ecm compares the actual gear with the shift schedule in the ecm memory
to detect the mechanical
trouble of the shift solenoid valves, th ...