Toyota Tacoma manuals

Toyota Corolla Repair Manual: Disposal

Hint

: when scrapping vehicle equipped with an srs or disposing of a instrument panel passenger airbag assy, always first deploy the airbag in accordance with the procedure described below. If any abnormality occurs with the airbag deployment, contact the service dept. Of toyota motor sales, u.S.A., Inc.

Caution

:

1. Dispose instrument panel passenger air bag assy (when scrapping vehicle deployment method)

Hint:

Hint

: prepare a battery for the power source to deploy the airbag.

  1.  check the function of sst (see step 1–(a) on page

  1. Disconnect the airbag connector.
  1.  Remove the instrument panel sub–assy lower.

    Notice

    : when handling the airbag connector, take care not to damage the airbag wire harness.

  2.  Disconnect the airbag connectors.

  1. Set sst.
  1.  Connect the connectors of the 2 sst to the instrument panel passenger airbag assy connectors.

    Sst 09082–00700, 09082–00780

Notice

: to avoid damaging the sst connector and wire harness, do not lock the secondary lock of the twin lock.

  1. Move the sst at least 10 m (33 ft) away from the front of the vehicle.
  2.  Close all the doors and windows of the vehicle.

    Notice

    : take care not to damage the sst wire harness.

  3.  Connect the red clip of the sst to the battery positive (+) terminal and the black clip to the negative (–) terminal.
  1. deploy the airbag.
  1.  Check that no one is inside the vehicle or within 10 m (33 ft) area around the vehicle.
  2.  Press the sst activation switch and deploy the airbag.

Hint

: the airbag deploys simultaneously when the led of the sst activation switch lights up.

  1.  dispose the instrument panel passenger airbag assy.

Caution

:

Hint

: when scrapping a vehicle, deploy the airbag and scrap the vehicle with the instrument panel passenger airbag assy being installed.

2. Dispose instrument panel passenger air bag assy (when disposing of airbag assembly deployment method)

Notice

:

Hint

: prepare a battery for the power source to deploy the airbag.

  1. Remove the instrument panel passenger airbag assy .

Caution

:

  1. Using a service–purpose wire harness for the vehicle, tie down the instrument panel passenger airbag assy to the tire.

    Wire harness: stripped wire harness section 1.25 Mm2 or more (0.0019 In.2 Or more)

Caution

: if the instrument panel passenger airbag assy is tied down with too thin wire harness, it may snap. This is highly dangerous.

Always use a wire harness which is at least 1.25 Mm2 (0.0019 In.2).

Hint

: to calculate the area of the stripped wire harness section: area = 3.14 X (diameter)2 divided by 4

  1. Install the 2 nuts to the instrument panel passenger airbag assy.

  1. Wind the wire harness around the brackets, as shown in the illustration.
  2. ) Position the instrument panel passenger airbag assy inside the tire with the airbag deployment side facing inside.

Tire size: must exceed the following dimensions– width: 185 mm (7.28 In.) Inner diameter: 360 mm (14.17 In.)

Caution

:

Notice

: the tire will be marked by the airbag deployment, so use a redundant tire.

  1. Check the function of sst (see step 1–(a) on page 60–14).

  1. Place tires.
  1.  Place at least 2 tires under the tire to which the instrument panel passenger airbag assy is tied.
  2.  Place at least 2 tires over the tire to which the instrument panel passenger airbag assy is tied. The top tire should have the wheel installed.

  1. Tie the tires together with 2 wire harness.

Caution

: make sure that the wire harness is tight. It is very dangerous if loosened wire harness result in the tires coming free due to the shock from the airbag deploying.

Hint

: place the sst connector and wire harness inside tires. Secure at least 1 m (3 ft) of slack for the wire harness.

  1. Set sst.

    Connect the connectors of the 2 sst to the instrument panel passenger airbag assy connector.

    Sst 09082–00700, 09082–00780

Notice

: to avoid damaging the sst connector and wire harness, do not lock the secondary lock of the twin lock.

  1.  deploy the airbag.
  1.  Connect the sst red clip to the battery positive (+) terminal and the black clip to the battery negative (–) terminal.
  2.  Check that no one is within 10 m (33 ft) radius around the tire which the instrument panel passenger airbag assy is tied to.
  3.  Press the sst activation switch and deploy the airbag.

Hint

: the airbag deploys simultaneously when the led of the sst activation switch lights up.

  1. Dispose of the instrument panel passenger airbag assy.

Caution

:

  1.  Remove the instrument panel passenger airbag assy from the tire.
  2.  Place the instrument panel passenger airbag assy in a vinyl bag, tie the end tightly and dispose of it in the same way as other general parts.
Replacement
Hint: components: 1. Precaution 2. Disconnect battery negative terminal 3. Remove instrument panel sub–assy lower Remove the screw from the glove compartment door stopper sub–assy. & ...

Front seat airbag assy rh
Disposal Hint: when scrapping vehicles equipped with an srs or disposing of the front seat airbag assy always first deploy the airbag in accordance with the procedure described below. If any ...

Other materials:

Turning on light switch does not light up night time illumination of radio receiver
Wiring diagram Inspection procedure 1 Inspect radio receiver assy(ill+, ill–) Check that the voltage between terminals at each condition, as shown in the chart. Standard: Repair or replace harness or connector ...

Circuit description
The airbag front rh sensor circuit consists of the airbag sensor assy center and airbag front rh sensor. Dtc b1156/b1157/15 is recorded when a malfunction is detected in the airbag front rh sensor circuit. Wiring diagram ...

Changing the passkey
1 Select “Passkey” using . 2 Input a 4 to 8-digit passkey using . Input the number 1 digit at a time. 3 When the entire number to be registered as a passkey has been input, press again. If the passkey to be registered has 8 digits, pressing again is not necessary. ...

© 2011-2024 Copyright www.tcorolla.net