Toyota Corolla (E120) 2002–2008 Repair Manual / Cruise control / Cruise control actuator assy
Toyota Corolla (E120): Cruise control actuator assy
Replacement
1. Remove cruise control actuator cover
- Disengage the 2 claws, then remove the cruise control actuator cover.
2. Separate accelerator control cable assy
- Loosen the double nut and separate the accelerator control cable assy.
3. Separate accelerator auto drive cable assy
- Remove the screw and separate the accelerator auto drive cable assy.
4. Remove cruise control actuator assy
- Remove the screw and separate the accelerator auto drive cable assy.
- Remove cruise control actuator assy
Clutch switch assy
Replacement
1. Remove clutch switch assy
- disconnect the connector.
- loosen the nut and remove the clutch switch assy.
Other materials:
Monitor description
While the engine is being cranked, the battery positive voltage is applied to
terminal sta of the ecm.
If the ecm detects the starter control signal (sta) while the vehicle is
driving, it will conclude that there is
a fault in the starter control circuit. The ecm will turn on the mil and a d ...
Selecting a folder
■ Selecting a folder
Press (
) or (
) to select the desired folder.
■ Selecting a folder and file from a folder list
1 Press .
A folder list will be displayed.
2 Turn and press to select a folder
and a file.
To return to the previous display, press
(BACK).
■ Return ...
Circuit description
Shifting from 1st to o/d is performed in combination with on and off of the
shift solenoid valve s1 and s2
controlled by ecm. If an open or short circuit occurs in either of the solenoid
valves, the ecm controls the
remaining normal solenoid valve to allow the vehicle to be operated smoothly
...