Toyota Corolla (E120): Combination meter assy

Overhaul

Hint

: components:

1. Remove meter hood sub–assy

2. Remove combination meter assy

  1. Remove the screw.
  2.  disengage the 2 clips as shown in the illustration.
  3.  disconnect the connector, then remove the combination meter.

3. Remove combination meter glass

  1. Disengage the 8 claws, then remove the combination meter glass.
    Share this page:

    Other materials:

    Malfunction in fuel receiver gauge
    Wiring diagram Inspection procedere 1 Inspect fuel sender gage assy Disconnect the connector fuel sender gauge. check the float position between e and f and measure the resistance between terminals 2 and 3 of the connector. Check that the resistance value changes continuously. S ...

    Problem symptoms table
    Hint: proceed with troubleshooting of each circuit in the table below. Symptom Suspect area When the ignition switch is in the on position, the srs warning light sometimes comes on after approximately 6 seconds.  Srs warning light ci ...

    How to use this manual
    General information 1. General description This manual is made in accordance with sae j2008.  generally, repair operations can be separated in the following 3 main processes:  Diagnosis  Removing/installing, replacing, disassembling/reassembling, checking and adju ...