Toyota Corolla (E120) 2002–2008 Repair Manual / Diagnostics / Cruise control system / Clutch switch circuit / Circuit description
Toyota Corolla (E120): Circuit description
When the clutch pedal is depressed, the clutch switch sends a signal to the cruise control ecu assy. When the signal is input to the cruise control ecu assy during cruise control driving, the cruise control ecu assy cancels the cruise control.
Wiring diagram
Other materials:
When stopping the engine with the shift lever in a position other than P (vehicles
with a continuously variable transmission)
If the engine is stopped with the shift lever in a position other than P, the
engine switch will not be turned off but instead be turned to ACCESSORY mode. Perform
the following procedure to turn the switch off:
1 Check that the parking brake is set.
2 Shift the shift lever to P.
► Vehi ...
Replacement
Hint: components:
1. Remove radiator grille sub–assy
2. Remove front bumper cover
3. Remove lh headlamp assy
Remove the 3 bolts.
pull out the headlight assy lh forward, then disconnect
the bracket of body side.
Release the claws and disconnect the connectors as
sh ...
Hood
Adjustment
Hint:
since the centering bolt is used as a hood hinge and hood lock
set bolt, the hood and hood lock can not be adjusted with it on.
Substitute a bolt with washer for the centering bolt.
1. Inspect hood sub–assy
Check that the clearance is within the standard value.
...