Toyota Corolla (E120): Circuit description
When driving uphill under cruise control, in order to reduce the number of shifting due to on–off overdrive operation and to provide smooth driving, when down shifting in the electronically controlled transmission occurs, a signal to prevent upshift until the end of the uphill slope is sent from the cruise control ecu assy to the electronically controlled transmission.
Terminal ect of the cruise control ecu assy detects the shift change signal (output to electronically controlled transmission no.2 Solenoid) from the ecm.
If the vehicle slows down, also when terminal ect of the cruise control ecu assy receives down shifting signal, it sends a signal from terminal od to ecm to cut overdrive until the end of the uphill slope, and the number of gear shifts are reduced and gear shift points in the electronically controlled transmission are changed.
Wiring diagram
Other materials:
Engine oil
With the engine at operating temperature and turned off, check the oil level
on the dipstick.
■ Checking the engine oil
1 Park the vehicle on level ground. After warming up the engine and turning it
off, wait more than 5 minutes for the oil to drain back into the bottom of the engine.
2 ...
Power door lock control system
Symptom
Suspected area
All doors are not operated by driver’s door key cylinder
interlocked with key
Door lock control switch
Front door lock assy lh
Wire harness
Integration relay
Key confinement prevention function does ...
Tire information
Typical tire symbols
► Full-size tire
► Compact spare tire
1 Tire size
2 DOT and Tire Identification Number (TIN)
3 Uniform tire quality grading
For details, see “Uniform Tire Quality Grading” that follows.
4 Location of treadwear indicators
5 Tire ply composition and ma ...