Toyota Corolla (E120) 2002–2008 Repair Manual / Diagnostics / Toyota vehicle intrusion protection system / Indicator light circuit / Circuit description
Toyota Corolla (E120): Circuit description
When the tvip system is preparing to be set, this circuit lights up the indicator light. When the system has been set, it continually turns the indicator light on for 0.2 Seconds and turns it off for 1.8 Seconds, thus the indicator light blinks.
Wiring diagram
Other materials:
On–vehicle inspection
1. Inspect pressure switch no.1.
Magnetic clutch control:
inspect pressure switch operation.
Set on the manifold gauge set.
Connect the positive (+) lead from the ohmmeter to
terminal 4 and the negative (–) lead to terminal 1.
Check continuity between termin ...
Smart key system
The following operations can be performed simply by carrying the electronic
key on your person, for example in your pocket.
(The driver should always carry the electronic key.)
● Locks and unlocks the doors
● Opens the trunk
● Starts the engine
■Antenna location
1 A ...
Replacement
1. Remove engine under cover rh
2. Drain coolant
3. Remove front wheel rh
4. Remove cylinder head cover no.2
Remove the 2 nuts, 2 clips and cylinder head cover.
5. Remove fan and generator v belt
Turn the v–ribbed belt tensioner slowly clockwise and
loosen it. Then, remove ...