Toyota Corolla (E120) 2002–2008 Repair Manual / Diagnostics / Audio system / Cassette tape cannot be inserted or played

Toyota Corolla (E120): Cassette tape cannot be inserted or played

Wiring diagram

Inspection procedure

1 Check for any foreign object

  1. Check for any foreign object.
  1.  Check that no foreign object or defect is detected in the cassette tape player of radio receiver assembly.

    Standard: no foreign object and defect detected.

2 Check cassette tape

2 Check cassette tape

  1. Check the cassette tape.
  1.  Check that the cassette tape is a normal tape to which music or voice is recorded.

    Standard: proper cassette tape to which music or voice is recorded.

3 Replace cassette tape with another and recheck

3 Replace cassette tape with another and recheck

  1. Replace the cassette tape with another and recheck.
  1.  Replace the faulty cassette tape with the normal one to see if the same trouble occurs again.

    Standard: the function is recovered to be normal.

4 Check if radio auto–search functions properly

4 Check if radio auto–search functions properly

  1. Check if the radio auto–search functions properly.
  1.  Perform the auto–search of the radio and check that the operation is normal.

    Standard: the operation returns to be normal.

5 Inspect radio receiver assy(+b, acc, gnd)

5 Inspect radio receiver assy(+b, acc, gnd)

  1. Check that the continuity between terminals at each condition, as shown in the chart.

Standard:

  1. Check that the voltage between terminals at each condition, as shown in the chart.

Standard:

Repair or replace harness or connector

Repair or replace harness or connector

    Share this page:

    Other materials:

    Replacing light bulbs
    ■ Headlight high beams 1 Turn the bulb base counterclockwise. 2 Pull the bulb out while pressing the lock release of the connector. 3 Replace the light bulb, and install the bulb base. Align the 3 tabs on the light bulb with the mounting and insert. 4 Turn and secure the bulb base. ...

    Check mode procedure
    1. Dtc check (check mode) Hint: hand–held tester only: compared to the normal mode, the check mode has more sensing ability to detect malfunctions. Furthermore, the same diagnostic items which are detected in the normal mode can also be detected in the check mode. Procedure for check m ...

    Inspection procedure
    Hint: troubleshoot each trouble symptom in accordance with the chart below. 1 Clear dtc Connect the hand–held tester or the obd ii scan tool to the dlc 3.  turn the ignition switch on and push the hand–held tester or the obd ii scan tool main switch on.  read the dtc . ...