Toyota Corolla (E120) 2002–2008 Repair Manual / Diagnostics / Audio system / Cassette tape cannot be ejected
Toyota Corolla (E120): Cassette tape cannot be ejected
Wiring diagram
Wiring diagram
1 Check if radio auto–search functions properly
- Check if the radio auto–search function properly.
- Perform the auto–research of the radio and check that the
operation is normal.
Standard: malfunction disappear.
2 Press ”eject” and check operation
- Press ”eject” and check the operation.
- Press the cassette tape eject switch of the radio receiver
assembly for 2 sec or more and check
that the cassette tape is ejected.
Standard: the cassette tape is ejected.
3 Check cassette tape
- Check the cassette tape.
- Check that the ejected cassette tape does not have the label
peeling, cassette body deformation
and others.
Standard: no fault on the cassette tape.
4 Replace cassette tape with another and recheck
- Replace the cassette tape with another and recheck.
- Replace the faulty cassette tape with the normal one to see if the
same trouble occurs again.
Standard: malfunction disappear.
5 Inspect radio receiver assy(+b, acc, gnd)
- Check that the continuity between terminals at each condition, as shown in the chart.
Standard:
- Check that the voltage between terminals at each condition, as shown in the chart.
Standard:
Repair or replace harness or connector
Other materials:
Emission inspection and maintenance (I/M) programs
Some states have vehicle emission inspection programs which include OBD (On
Board Diagnostics) checks. The OBD system monitors the operation of the emission
control system.
If the malfunction indicator lamp comes on
The OBD system determines that a problem exists somewhere in the emission cont ...
Inspection procedure
Hint:
the switch described in this text is a switch for transmitting signals which is
built in the door control transmitter.
1 Check wireless door lock control functions
Normal
2 Replace transmitter battery with normal one
After replacing the transmitter battery with a new or normal o ...
Front differential oil seal
Replacement
1. Drain manual transaxle oil
torque: 39.2 Nvm (400 Kgf·cm, 29 ft·lbf)
2. Remove front wheels
3. Remove engine under cover lh
4. Remove engine under cover rh
5. Drain transaxle oil
6. Remove front drive shaft assy lh
sst 09520–01010, 09520–24010 (09520–32040)
7. R ...