Toyota Corolla (E120): Brake
On–vehicle inspection
1. Inspect brake line pipes and hoses
Hint
: work in a well–lighted area. Turn the front wheels fully to the right or left before begining.
- check all the brake lines and hoses for:
- damage
- wear
- deformation
- cracks
- corrosion
- leaks
- bends
- twists
- check all the clamps for tightness and the connections for leakage.
- check that the hoses and lines are not near sharp edges, moving parts and the exhaust system.
- check that the lines are installed pass through the center of the grommets.
2. Inspect front brake pads and discs
3. Inspect rear brake linings and drums
4. Inspect or change brake fluid
fluid: sae j1703 or fmvss no.116 Dot3
Other materials:
Floor shift cable transmission control shift
Replacement
Hint: components:
1. Remove air conditioner unit assy
Hint:
refer to the instructions for removal of the air conditioner unit assy.
2. Separate air bag sensor assy center
remove the 3 bolts, separate the airbag sensor assy center.
3. Remove exhaust pipe assy
4. Remo ...
Inspection procedure
1 Inspect shift solenoid valve(s1)
Remove the shift solenoid valve s1.
measure the resistance according to the value(s) in the
table below.
Standard:
Connect the positive (+) battery lead to the solenoid connector
terminal, and the negative (–) battery lead to the
solenoid ...
Instrument panel/meter
Preparation
Sst
Recomended tools
Equipment
Seat
Preparation
Equipment
Theft deterrent & door lock
Preparation
Recomended tools
...