Toyota Corolla (E120) 2002–2008 Repair Manual / Exterior/interior trim / Body rocker panel moulding lh
Toyota Corolla (E120): Body rocker panel moulding lh
Replacement
Hint
: use the same procedures for the rh side and lh side.
1. Remove body rocker panel moulding lh
- Remove the 8 retainers.
- using a screwdriver, remove the moulding.
Hint
: tape the screwdriver tip before use.
- remove the 7 clips from the moulding.
2. Install body rocker panel moulding lh
- Install the moulding with 7 new clips.
- install the 8 retainer to the moulding.
Other materials:
Capacity and distribution
Cargo capacity depends on the total weight of the occupants.
(Cargo capacity) = (Total load capacity) — (Total weight of occupants)
Steps for Determining Correct Load Limit —
(1) Locate the statement “The combined weight of occupants and cargo should never
exceed XXX kg or XXX lbs.” on ...
Inspection procedure
1 Reconfirm dtc
Check the dtc
2 Inspect skid control ecu connector securely connected
3 Inspect skid control ecu connector(ig1 terminal voltage)
In case of using hand–held tester:
check the voltage condition output from the ecu displayed on the
hand–held tester.
O ...
Canceling and resuming the constant speed control
1 Pulling the lever toward you cancels the constant speed control.
The speed setting is also canceled when the brakes are applied or the clutch
pedal (manual transmission) is depressed.
2 Pushing the lever up resumes the constant speed control.
Resuming is available when the vehicle speed is mo ...