Toyota Corolla (E140) 2007–2013 Body Repair Manual / Paint coating / Body panel sealing areas
Toyota Corolla (E140): Body panel sealing areas
Be sure to apply body sealer to the body panel joints and door edges (tip of outer panel folded part), etc., To waterproof and rustproof them.
Hint:
- apply degreasing agent to a clean cloth and clean the sealer application areas.
- After removing the applied spot sealer from the sealer application areas using thinner or equivalent, rustproof the areas by applying primer or equivalent. Then apply body sealer.
- If sealer is unnecessarily applied to an area, apply degreasing agent to a clean cloth and clean off the sealer immediately.
|
|
Flat finishing |
|
No flat finishing |
1. Engine compartment
2. Inside
3. Outside
4. Door parts
Other materials:
Inspection procedure
Hint:
start the inspection from step 1 in case of using the hand–held tester and start
from step 2 in case of not
using the hand–held tester.
1 Read value of hand–held tester(skid control sensor)
Check that there is no difference between the speed value output from
the speed sensor ...
Vehicle information
This screen can be used to display the fuel consumption.
“Trip Information” or “Past Record” screen
Press “CAR” to display the “Trip Information” or “Past Record” screen.
Fuel consumption
■ Trip information
If the “Trip Information” screen does not appear, select ...
General information
1. Basic dimensions
(a) there are two types of dimensions in the diagram.
(1) (Three-dimensional distance)
straight-line distance between the centers of two
measuring points.
(2) (Two-dimensional distance)
horizontal distance in forward/rearward direction
between the centers o ...