Toyota Corolla (E170): Bluetooth® device registration status

1 Display the “Bluetooth* Setup” screen.

*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

2 Select the device.

3 Select “Device Info”.

4 Following screen is displayed:

1 Device Name
2 Change connection method 3 Bluetooth® Address
4 Display your telephone number The number may not be displayed depending on the model of phone.

5 Compatibility profile of the device 6 Restore default settings

Changing connection method

    Share this page:

    Other materials:

    Rear combination lamp assy lh
    Replacement Using a clipremover, remove the 2 clips and disconnect the luggage compartment trim cover lh. Disconnect the connector and remove the 3 nuts. Pull out the rear combination light assy lh to the back of the vehicle, and remove. ...

    Inspection procedure
    1 Check side air bag sensor assy lh Sst 09843–18040 Connect the negative (–) terminal cable to the battery, and wait at least for 2 seconds.  turn the ignition switch to on, and wait at least for 20 seconds.  clear the dtc stored in memory .  turn the ignition swi ...

    Circuit description
    A thermistor is built in the engine coolant temperature sensor and changes the resistance value according to the engine coolant temperature. The structure of the sensor and connection to the ecm is the same as those of the intake air temperature sensor. Hint: if the ecm detects the dtc ...