Toyota Corolla (E170): Bluetooth®

■When using the Bluetooth® audio system

●In the following situations, the system may not function.

• The portable player does not support Bluetooth® • The cellular phone is located outside the service area • The Bluetooth® device is switched off • The Bluetooth® device has a low battery • The Bluetooth® device is not connected to the system • The Bluetooth® device is behind the seat or in the glove box or console box, or is touching or covered by metal objects

●There may be a delay if a cellular phone connection is made during Bluetooth® audio playback.

●Depending on the type of portable audio player that is connected to the system, operation may differ slightly and certain functions may not be available.

■When transferring ownership of the vehicle

Be sure to initialize the system to prevent personal data from being improperly accessed.

■About Bluetooth®

Bluetooth is a registered trademark of Bluetooth SIG. Inc.

■Compatible models

■Compatible models

●Bluetooth® specifications: Ver. 1.1, or higher (recommended: Ver. 2.1 + EDR or higher)

●Following Profiles: • A2DP (Advanced Audio Distribution Profile) Ver. 1.0, or higher (recommended: Ver. 1.2 or higher)
• AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher (recommended: Ver. 1.3 or higher)

Portable players must correspond to the above specifications in order to be connected to the Bluetooth® audio system. However, please note that some functions may be limited depending on the type of portable player.

●Cellular phone • HFP (Hands Free Profile) Ver. 1.0 or higher (recommended: Ver. 1.5) • OPP (Object Push Profile) Ver. 1.1 • PBAP (Phone Book Access Profile) Ver. 1.0

CAUTION

■While driving

Do not operate the portable audio player, cellular phone or connect a device to the Bluetooth® system.

■Caution regarding interference with electronic devices

●Your audio unit is fitted with Bluetooth® antennas. People with implanted pacemakers or cardiac defibrillators should maintain a reasonable distance between themselves and the Bluetooth® antennas. The radio waves may affect the operation of such devices.

●Before using Bluetooth® devices, users of any electrical medical device other than implanted pacemakers and implanted cardiac defibrillators should consult the manufacturer of the device for information about its operation under the influence of radio waves. Radio waves could have unexpected effects on the operation of such medical devices.

NOTICE

■When leaving the vehicle

Do not leave your portable audio player or cellular phone in the vehicle. The inside of the vehicle may become hot, causing damage to the portable audio player or cellular phone.

    Share this page:

    Other materials:

    Problem symptoms table
    Hint: if a normal code is displayed during the dtc check but the trouble still occurs, check the circuits for each symptom in the order given in the charts on the following pages and proceed to the page given for troubleshooting. The matrix chart is divided into 3 chapters. If the instruc ...

    Diagnostic trouble code chart
    Hint: when the srs warning light remains lit up and the dtc is the normal code, this means a voltage source drops. This malfunction is not stored in memory by the airbag sensor assy center and if the power source voltage returns to normal, the srs warning light will autom ...

    Pressing power switch does not start system
    Wiring diagram Inspection procedure 1 Inspect radio receiver assy(+b, acc, gnd) Check that the continuity between terminals at each condition, as shown in the chart. Standard: Check that the voltage between terminals at each condition, as shown in the chart. Standard: ...