Toyota Corolla (E210): Before driving

Observe the following before starting off in the vehicle to ensure safety of driving.

Floor mat

Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet.

1. Insert the retaining hooks (clips) into the floor mat eyelets.

2. Turn the upper knob of each

2. Turn the upper knob of each retaining hook (clip) to secure the floor mats in place.

Always align the  marks A.

Always align the The shape of the retaining hooks marks A.

The shape of the retaining hooks (clips) may differ from that shown in the illustration.

WARNING

Observe the following precautions.

Failure to do so may cause the driver's floor mat to slip, possibly interfering with the pedals while driving. An unexpectedly high speed may result or it may become difficult to stop the vehicle.

This could lead to an accident, resulting in death or serious injury.

■When installing the driver's floor mat

  • Do not use floor mats designed for other models or different model year vehicles, even if they are Toyota Genuine floor mats.
  • Only use floor mats designed for the driver's seat.
  • Always install the floor mat securely using the retaining hooks (clips) provided.
  • Do not use two or more floor mats on top of each other.
  • Do not place the floor mat bottom- side up or upside-down.

■Before driving

  • Check that the floor mat is securely fixed in the correct place with all the provided retaining hooks (clips). Be especially careful to perform this check after cleaning the floor.

  • With the engine stopped and the shift lever in P, fully depress each pedal to the floor to make sure it does not interfere with the floor mat.
    Share this page:

    Other materials:

    Replacement
    1. Work for preventing gasoline from spilling out 2. Remove cylinder head cover no.2 Remove the 2 nuts, 2 clips and cylinder head cover. 3. Disconnect ventilation hose Disconnect the ventilation hose from the cylinder head cover. 4. Disconnect engine wire Disconnect ...

    Inspection procedure
    1 Check tvip ecu Check that the operation of the tvip function is normal. Hint: with this inspection, the tvip ecu cpu can be diagnosed if it works normally or not. 2 Check wire harness (tvip ecu integration relay) Disconnect the tvip ecu and integration relay connectors. ch ...

    Inspection procedure
    1 Check operation(stop lamp swtich assy) Check that the stop light comes on when the brake pedal is depressed, and turns off when the brake pedal is released. 2 Input signal check See input signal check on page 05–745.  check the indicator light when the brake pedal ...