Toyota Corolla (E210): Alarm
The alarm uses light and sound to give an alert when an intrusion is detected.
The alarm is triggered in the following situations when the alarm is set:
- A locked door or trunk is unlocked or opened in any way other than using the entry function (if equipped), wireless remote control, mechanical key (if equipped) or key (if equipped). (The doors will lock again automatically.)
- The hood is opened.
Setting/deactivating/stopping the alarm system
■ Items to check before locking the vehicle
To prevent unexpected triggering of the alarm and vehicle theft, make sure of the following:
- Nobody is in the vehicle.
- The windows and moon roof (if equipped) are closed before the alarm is set.
- No valuables or other personal items are left in the vehicle.
■ Setting
Close the doors, trunk and hood, and lock all the doors.
The system will set automatically after 30 seconds.
The indicator light changes from being on to flashing when the system is set.
■ Deactivating or stopping
Do one of the following to deactivate or stop the alarms:
- Unlock the doors.
- Turn the engine switch to ACC or ON, or start the engine. (The alarm will be deactivated or stopped after a few seconds.)
■System maintenance
The vehicle has a maintenance- free type alarm system.
■Triggering of the alarm
The alarm may be triggered in the following situations: (Stopping the alarm deactivates the alarm system.)
- A person inside the vehicle opens a door, the trunk or hood, or unlocks the vehicle using a door lock switch or inside lock button.
- The battery is recharged or replaced when the vehicle is locked.
■Alarm-operated door lock
In the following cases, depending on the situation, the door may automatically lock to prevent improper entry into the vehicle:
- When a person remaining in the vehicle unlocks the door and the alarm is activated.
- While the alarm is activated, a person remaining in the vehicle unlocks the door.
- When recharging or replacing the battery
NOTICE
■To ensure the system operates correctly
Do not modify or remove the system.
If modified or removed, the proper operation of the system cannot be guaranteed.
Other materials:
Circuit description
The rotary solenoid type idle air control (iac) valve is located
under the throttle body and intake air bypassing the throttle
valve flows into the iac valve through the passage.
In this way the intake air volume bypassing the throttle valve is
regulated, controls the engine speed.
The ...
Precaution
1. Work precautions
(A) vehicle protection
(1) when welding, cover glass, seats, carpets, etc. With
heat resistant fireploof covers to protect them.
(B) safety
(1) never stand in the path of the chain when using a puller
on the body or frame, and be sure to attach a safety
cable.
...
Overhaul
1. Drain clutch fluid
2. Disconnect clutch release cylinder to flexible hose tube
Using sst, disconnect the flexible hose tube.
Sst 09023–00100
Hint:
use a container to catch the fluid.
3. Remove clutch release cylinder assy
Remove the 3 bolts, clutch release cylinder assy ...