Toyota Corolla Repair Manual: Adjustment
Hint
:
- in the rh side, work in the same procedure as in the lh
side.
- Since the centering bolt is used as a door side hinge bolt,
the door hinge cannot be adjusted with it on. Substitute
the bolt with washer for the centering bolt.
1. Inspect front door panel sub–assy lh
- Check that the clearance is within the standard value.
2. Adjust front door panel sub–assy lh
- Using sst, adjust the door by loosening the body side
hinge bolts.
Sst 09812–00010
torque: 26 nvm (265 kgfvcm, 19 ftvlbf)
- Adjust the door by loosening the door side hinge bolts.
Torque: 26 nvm (265 kgfvcm, 19 ftvlbf)
- Adjust the striker position by slightly loosening the striker
mounting screws, and hitting the striker with a plastic
hammer.
- tighten the striker mounting screws again.
Torque: 23 nvm (235 kgfvcm, 17 ftvlbf)
Hint:
installation is in the reverse order of the removal. But the
installation is indicated only when it has a
point.
In the rh side, work in the same procedure as in the lh side.
1. Re ...
Other materials:
Steering column
Preparation
Sst
Recomended tools
Equipment
...
Replacement
Hint:
installation is in the reverse order of the removal. But the installation is
indicated only when it has a point.
1. Remove spare wheel cover assy
2. Remove rear floor finish plate
Remove the 3 clips.
using a moulding remover, remove the rear floor finish
plate.
3. Rem ...
Components
...