Toyota Corolla (E120): Adjustment
1. Put vehicle these conditions
- tire inflation pressure is the specified value .
- start the engine.
2. Adjust fog light aim
- The fog light aim can be adjusting by moving the aiming screw in the vertical direction.
Hint
: the optical aim moves upward when turning a screwdriver clockwise, while it moves downward when turning a screwdriver counterclockwise.
3. Check fog light aim
Other materials:
Child restraint systems with a top tether strap
1 Adjust the head restraint to the downmost position.
2 Secure the child restraint system using the seat belt or LATCH anchors.
3 Open the anchor bracket cover, latch the hook onto the anchor bracket and tighten
the top tether strap.
Make sure the top tether strap is securely latched.
` ...
Maintenance requirements
To ensure safe and economical driving, day-to-day care and regular maintenance
are essential. It is the owner’s responsibility to perform regular checks. Toyota
recommends the following maintenance:
General maintenance
General maintenance should be performed on a daily basis. This can be don ...
Body panel undercoating areas
Apply pastar uwe or pastar uc to the chassis, floor underside, sheet metal
fitting weld points of the body, and
inside of the wheel house to prevent rust and noise, as well as protect the body
from flying rocks.
Hint:
work must be performed while wearing the appropriate protective ...